Product Introduction

The dual station fiberglass hydraulic extrusion equipment adopts a dual position gantry clamping structure, and the dual systems operate independently without interfering with each other, running smoothly, energy-saving and efficient, saving space, and improving production efficiency.

Performance Characteristics

●Longmen has an effective length of 1000mm and a width of 400mm, capable of producing profile products weighing up to 5kg per meter.

●Traction operation adopts mechanical transmission, servo motor provides power, runs smoothly, and has low noise.

●Longmen Plus adopts an independent servo hydraulic system control, which is fast, generates less heat, and is energy-saving and efficient.

●The front section of the traction gantry is equipped with a product guidance and positioning device, which can easily adjust and correct the position and straightness of the product.

●The traction gantry operating area is protected by aluminum roller blinds, which are sturdy and durable.

●The guide rail lubrication adopts an automatic lubrication station with scheduled settings, saving time and maintenance.

●The rear of the device is equipped with a power supply and socket for easy access to auxiliary equipment.

●The cantilever control box can swing 180 degrees, the instrument button layout is reasonable, and the 10 inch large screen is convenient for setting and viewing parameters.

●Temperature control adopts instrument control, with 8 temperature zones, and the values can be stored in the system for easy access to MES system in the future.

●The clamping pressure of the equipment's operating speed can be conveniently adjusted through a knob.

●The frame of the shaping table adopts a sunken structure, and an oven can be installed for insulation of polyurethane and epoxy products.

●For polyurethane and epoxy products, additional frames can also be added to increase the distance between the mold and the traction quality inspection, improving the straightness of the product.

●The mold table adopts a two-dimensional adjustment structure, which can adjust the height, left and right of the mold outlet to improve the straightness of the product.

●The mold table is equipped with a tension sensor that can monitor the traction tension of the product in real time, providing effective reference for the process.

●Each workstation is equipped with alarm indicator lights, which provide real-time indication of the working status.

●The cutting machine adopts a diamond saw blade with a diameter of 500, a dual station structure, rear positioning, and a cutting accuracy of 1mm. After cutting, the products are quickly transported to the material receiving car through a belt.

●A dipping tank with a yarn drying device is used to ensure the processability of products in high humidity environments.